Tajima Sports Floor products are designed specifically with multi-purpose applications in mind. Understanding that multi-purpose floors have to be used for sports applications and meal service with tables/chairs, this floor is designed to do both very well. Tajima manufactures with raised embossing to prevent dirt from being trapped in the embossing which increases the static load so the floors could handle point loads better than most sports floors of similar thickness. Additionally, Tajima uses an anti-wicking moisture barrier on the back of the floor to protect the closed cell foam from moisture in the slab, a common problem with gyms which are typically on grade. With 4 thickness options and 3 wood visuals, Tajima Sports Floors provide a solution for every budget and design. Tajima Sports Floors are FloorScore Certified, meeting the highest standards for indoor air quality. All products have pre and post-consumer recycled content and contribute to LEED® certification.
Roll size(s):
7.0mm: 6’ x 43’6” - 29 sq. yds/roll
5.0mm: 6’ x 49’ - 32.57 sq. yds/roll
3.0mm: 6’ x 59’ – 39.33 sq. yds/roll
Thickness:
3.5mm (0.140”)
5.0mm (0.200”)
7.0 mm (0.280")
Wear Layer: ASTM F 1303 Type I Grade 1 commercial wear layer.
Backing: ASTM F 1303 Class A backing.
Technical Data
Abrasion resistance per ASTM D 3884: Conforms at 24000 cycles.
Static Coefficient of Friction per ASTM C 1028: 0.90.
Impact Sound Transmission (IIC) per ASTM E 492: 54.
Resistance to Chemicals per ASTM F 1303 requirements using ASTM F 925 method: Pass
(List of chemicals available on request).
Residual Impression per DIN D 18032-2-2001-04: 0.21mm.
Static Load Limit per ASTM F 970: 0.001” residual indentation at 250lbs applied
weight.
Performance Characteristics:
Ball bounce per DIN D 18 032-2-2001-04: 99%.
Ball rebound per NCAA Rebound Test: Pass.
Shock Absorption per DIN D 18 032-2-2001-04:
3.5mm (0.140”) 18%
5.0mm (0.200”) 23%
7.0mm (0.280”) 29%.
Shock Absorption per ASTM F 355 (Gmax): 850.
Rolling load per DIN D 18 032-2-2001-04: 1000.
Impact resistance per DIN D 18032-2-2001-04: 21Nm.
Sliding properties per DIN D 18 032-2-2001-04: min 0.56, max 0.60.
Sports floors are Floorscore Certified
Tajima Sports Floors contain Protech – a factory applied UV Cured Polyurethane finish that allows for no wax and easy maintenance. Follow instructions for initial and regular cleaning.
Refer to Tajima Technical Installation Manual for detailed specifications on installing Tajima Sports Floor with regard to job site conditions, substrate testing and preparation installation over expansion joints, adhesive and trowel selection and application, layout and installing, seam treatment, clean up and protection of new floor covering after installing.
