Tajima’s Xcela Tile is the ideal product for retail, education or healthcare applications. It comes in 39 bright, vibrant colors in an 18 x 18 tile format. Tiles and planks are reinforced with Fiber Flex fillers and provide 7x more flexibility than VCT. The Multi-Wood line offers 4 colors of planks that can be combined with Xcela Tiles for use in basketball and volleyball courts. Tajima offers fabricated basketball and volleyball courts in standard size or custom which can be permanently installed for the life of the floor. Tajima Xcela and Multiwood Floors are FloorScore Certified, meeting the highest standards for indoor air quality. All products have pre and post-consumer recycled content and contribute to LEED® certification.
Size: 457.2mm x 457.2mm 18” x 18”)
Thickness: 3.0mm
Quantity: 15 tiles per carton / 33.75 square feet per carton
Homogeneous vinyl tiles shall be manufactured with high gloss urethane coating and fillers contain “non woven polyolefin fibers” for flexibility and dimensional stability.
Technical Data
Federal Specifications - FS-SS-T-312B, Type IV, Composition C1
Static Load Limit– Shall meet the requirements of L-F-475A for residual indentation (maximum 0.005" – minimum load 500 psi)
Static Load Limit ASTM F910 - 500 psi
Chemical & Stain Resistance – Excellent
Fire Resistance - Class 1, per ASTM E-648; >0.45.
Smoke Density <450 per ASTM E-662.
Slip Resistance >0.60 per ASTM C-1028-89. (Complies with ADA Requirements for Level Surfaces.)
Xcela Tile is FloorScore Certified.
Tajima Xcela has a factory applied finish already applied to the floor so only minimal coating is required to protect the floor after installation. Tajima recommends 2 coats of finish to enhance the beauty of the product and extend the life of the floor.
Inspect subfloor surfaces carefully to determine acceptability; and thoroughly sand and vacuum surface to remove miscellaneous dirt and foreign materials. All Tajima floor tiles shall be installed under proper job conditions per manufacturer’s current written specifications and installation instructions, using only manufacturer’s approved adhesive. Eco Bond or Chapco #299 adhesive is approved for installation of Xcela.
